Attaching The Belt Clip - Panasonic KX-WT125 Operating Instructions Manual

Attaching the Belt Clip

You can attach the handset to your belt by following the steps below.
[To attach]
1 Insert the clip into the designated notches in the
handset.
2 Slide the clip into the holder until it clicks.
[To remove]
1 Make sure to turn the handset 180° when you
take it off.
2 Remove the belt clip.
Note
When you attach the phone strap to the handset with the belt clip attached, use the
strap holes on the belt clip instead of the ones on the handset.
Before Initial Use
7