For Best Performance - Panasonic KX-WT125 Operating Instructions Manual

• Do not place metal items such as coins or rings on the charger. As they become
hot, you might get burnt if you touch them.
• When you leave the product unused for a long period of time, unplug the AC
adaptor from the outlet.
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet
is installed near the product and is easily accessible.

For Best Performance

Operating Range
• The range of operation depends on the topography of your office, weather, or
usage conditions, because signals are transmitted between the CS and the
handset by radio waves.
• Normally, you get greater range outdoors than indoors. If there are obstacles such
as walls, noise may interfere with your telephone calls. In particular, high metal
shelves or reinforced concrete walls will restrict your operating range.
• A handset may not work when it is too far from the CS depending on the structure
of the building.
• We strongly suggest you hold the bottom half of the handset to ensure better call
quality. Because, the antenna is located in the upper half of the handset.
Noise
Occasional noise or interference may occur due to electromagnetic radiation from
objects such as refrigerators, microwave ovens, faxes, TVs, radios, or personal
computers. If noise disturbs your telephone calls, keep the handset away from these
electrical appliances.
Environment
• Keep the product away from heating appliances and devices that generate
electrical noise, such as fluorescent lamps and motors. These noise sources can
interfere with performance of the product.
• Do not place the product in rooms where the temperature is less than 5 °C (41 °F)
or greater than 40 °C (104 °F).
• Allow 10 cm (3-15/16 in) clearance around the product for proper ventilation.
• Avoid environments with excessive smoke, dust, moisture, mechanical vibration,
shock, or direct sunlight.
• The apparatus is designed to be installed and operated under controlled
conditions of ambient temperature and a relative humidity.
Routine Care
• Unplug the charger from the AC outlet before cleaning.
• Wipe the product with a soft cloth.
• Do not clean the product with abrasive powder or with chemical agents such as
benzene or thinner.
Important Information
77