HP F2974KT - OmniBook 500 - PIII 700 MHz Manual page 94

CAUTION
WARNING
Configuring and Expanding Your Computer
Installing Additional RAM
1. If your computer is docked, undock it.
2. Click Start, Shut Down, Shut down.
3. Important: Unplug the AC adapter, if present, and remove the battery.
4. Remove the plastic panel above the keyboard (containing the power button and
keyboard status lights). Pry the right end of the panel up with a small, flat-blade
screwdriver, then lift the end until the panel unsnaps above the F12 key. Slide the
panel slightly to the right and lift it out.
5. Remove the three screws holding the top of the keyboard.
When opening the keyboard, be careful not to pull on the cables connecting the
keyboard to the computer.
6. Raise the top edge of the keyboard slightly, then slide it back about 1 cm (1/2 in) and
fold it onto the front of the case.
Do not touch the metal surfaces inside the computer until they have cooled off.
They could be very hot if the computer was running recently.
Do not touch the electronic components inside the computer. Static electricity can
permanently damage them.
94 Corporate Evaluator's Guide