To Install The 3Com Power Management Tdi Service - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Using Windows NT 4.0
Installing Windows NT 4.0
Card Executive adds the following capabilities to your HP Notebook:
• Plug and Play for PC Cards using standard Windows NT drivers
• Plug and Play for supported network PC Cards
• Automatic configuration of PC Cards utilizing advanced "Wizard" technology to
allocate system resources
• Suspend/Resume functions and simplified administration of PC Cards when
integrated with Phoenix APM
To install Card Executive:
1. Go to the PCCard directory and run SETUP.EXE.
2. Click the Card Executive button to begin the installation process.
3. Click "I Understand" then click OK.
4. Click Restart Now and eject the CD.
5. After reboot, click Next to run the PC Card Diagnostics.
6. Make sure there are no PC Cards installed in the HP Notebook and click Next to start
the Diagnostics.
7. Click Finish to reboot.
After reboot, the PC Card icon appears on the Taskbar.

To install the 3Com Power Management TDI service

To install:
1. Use Windows Explorer to view the C:\HP\DRIVERS\NT4\LAN subdirectory and
double-click on TDIINST.EXE.
To uninstall:
1. Select Network from the Control Panel, select the Services Tab, select the 3Com NT
Power Management TDI service, and click Remove.
2. Click Yes when asked "Do you wish to continue?".
3. Close the Network Properties window.
4. When prompted, select Yes to restart computer.
138 Corporate Evaluator's Guide