Step 3 - Connect A Phone Line; Step 4 - Turn On The Computer - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Hint
Introducing the Notebook Computer
Setting Up Your Computer
Step 3 – Connect a phone line
If your computer does not include a built-in modem, you can skip this step. Also, if you
prefer, you can instead connect to a PC Card modem or an external modem.
1. Make sure the telephone line is an analog line, sometimes called a data line. (You
must not use a digital line.)
2. Connect the telephone cord to the built-in modem.
3. Plug the other end of the phone cord into a telephone jack. If the plug on the phone
cord doesn't fit the jack, you may need to use an adapter.
For details about using the modem, see "Using the Modem" on page 68.
Step 4 – Turn on the computer
• Press the blue sleep button above the keyboard. The computer then boots up, and
Windows starts automatically.
If your computer does not turn on when operating on battery power, the battery may be
out of power. Plug in the AC adapter and press the blue sleep button again. Leave the
AC adapter plugged in for at least an hour.
24 Corporate Evaluator's Guide