To Install Modem Support - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Hp omnibook 500 - corporate evaluator's guide
Hide thumbs Also See for F2974KT - OmniBook 500 - PIII 700 MHz:
Table of Contents

Advertisement

Using Windows NT 4.0
Installing Windows NT 4.0
12. Click "Close" on the Mouse Properties panel.
13. When prompted, restart your computer so the new settings will take effect.

To install modem support

If you have an HP Notebook equipped with an internal modem you will need to identify
which modem was supplied in order to install the appropriate driver. Your HP Notebook
contains either a 3Com 56K V.90 Mini PCI Modem (combo) or 3Com V.90 MPCI
Modem 556B (modem only).
If your notebook is equipped with both a LAN port and a telephone jack you have the
3Com 56K V.90 Mini PCI Modem combo card. You should use the drivers found on
HP's web site at http://www.hp.com/omnibook, in the
HP\DRIVERS\NT4\MODEM\PCICOMBO directory.
If your notebook is equipped with only a telephone jack you have the 3Com V.90 MPCI
Modem 556B Modem only card and should use the drivers found at
http://www.hp.com/omnibook, in the HP\DRIVERS\NT4\MODEM\PCIMODEM
directory.
If your notebook is not equipped with a phone jack, then a modem was not supplied.
To install 3Com V.90 MPCI Modem 556B support (modem only):
If you have installed a retail Windows NT 4.0, and your HP Notebook contains a built-in
3Com V.90 MPCI Modem 556B, you need to install the modem drivers. The modem
drivers are contained in the \HP\DRIVERS\NT4\MODEM\PCIMODEM subdirectory.
If you are unsure which modem has been supplied, review WHICH_1.TXT contained in
the \HP\DRIVERS\NT4\MODEM subdirectory.
To install or upgrade the 3Com V.90 MPCI Modem 556B drivers:
1. Run SETUP.EXE from the \HP\DRIVERS\NT4\MODEM\PCIMODEM directory.
2. Select "Install" on the Modem Setup screen.
3. Select default COM port when prompted.
4. The drivers will be installed after rebooting the computer.
To install 3Com 56K V.90 Mini PCI Modem support (combo)
1. Run SETUP.EXE from the \HP\DRIVERS\NT4\MODEM\PCICOMBO directory.
2. Select "Install" on the Modem Setup screen.
3. Select default COM port when prompted.
132
Corporate Evaluator's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnibook 500 - notebook pcOmnibook 500

Table of Contents