Faxing A Paper Document - Dell 924 All-in-One Photo Printer User Manual

7.
NOTE: Selecting the Enable Receive check box allows you to receive faxes but may cause the
computer modem to answer all phone calls, in which case you may not receive voice mail.
8. Click Next.
9. On the Transmitting Subscriber Identification (TSID) screen, type the identification information
(usually your fax number and your name or business name) in the TSID box. This information will
appear in the header area of the faxes you send and identifies your fax machine to the person who
receives your faxes.
NOTE: The TSID is mandatory in some areas.
10. Click Next.
NOTE: Steps 10–13 only occur if you enabled your machine to receive faxes in step 6.
11. On the Called Subscriber Identification (CSID) screen, type the CSID (appears to confirm that the
fax is being sent to the correct recipient) that you want in the CSID box.
12. Click Next.
13. On the Routing Options screen, click to select the Print it on check box if you want each received
fax to be automatically printed. When you select this check box, select the Dell Photo AIO Printer
924 to print the received fax.
NOTE: Your printer must be on and connected to your computer in order to automatically print faxes.
14. Click to select the Store a copy in a folder check box if you want to create an archive copy of each
fax. When you select this check box, you are able to specify the storage location for the fax copy.
15. Click Next.
16. Confirm the configuration settings in the Configuration Summary list, and then click Finish.
You are now ready to send or receive faxes.

Faxing a Paper Document

To fax a single or multiple page paper document, use the Dell All-In-One Center.
1. Turn on your printer and computer, and make sure they are connected. Make sure your computer
modem is connected to an active analog phone line. If you have DSL broadband service on the same
phone line that you are using to fax, you must also have a DSL filter installed. Contact your Internet
Service Provider for information.
2. Place your document on the scanner glass, and make sure the upper left corner aligns with the arrow
on the printer.
3.