Table of Contents
Advertisement
W
-B
M
EB
ASED
ANAGEMENT
VLAN Current Table
This screen shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a
large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based
VLAN for one or two switches, you can assign ports to the same
untagged VLAN. The current configuration is shown in the
following screen.
Parameter
VLAN Entry Delete
Count
VLAN ID
Up Time
at Creation
Status
3-34
Description
The number of times a VLAN entry has been deleted
from this table.
The ID for the VLAN currently displayed.
The value of System Up Time (sysUpTime) when this
VLAN was created.
Shows how this VLAN was added to the switch.
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
(Note that GVRP is not supported by the current
firmware version.)
Advertisement
Table of Contents
