Table of Contents
Advertisement
W
-B
M
EB
ASED
ANAGEMENT
System Information
Use the System Information screen to display descriptive
information about the switch, or for quick system identification as
shown in the following figure and table.
Parameter
System Name*
IP Address
Object ID
Location*
Contact*
System Up Time
*
Maximum string length is 255, but the screen only displays 45 characters.
You can use the arrow keys to browse the whole string.
3-8
Description
Name assigned to the switch system.
IP address of the agent you are managing. The agent
supports SNMP over UDP/IP transport protocol. In
this environment, all systems on the Internet, such as
network interconnection devices and any PC
accessing the agent (or running EliteView) must have
an IP address. Valid IP addresses consist of four
decimal numbers, of 0 to 255, separated by periods.
Anything outside of this format will not be accepted
by the configuration program.
MIB II object identifier for switch's network
management subsystem.
Specifies the area or location where the system
resides.
Contact person for the system.
Length of time the current management agent has
been running.
Advertisement
Table of Contents
