SMC Networks TigerSwitch 100 SMC6924VF Management Manual page 47

Parameter
FlowControl InUse
Speed and DuplexInUse Displays the current port speed and duplex
U S
SING THE YSTEM
Description
Shows the flow control type in use. Flow control
can eliminate frame loss by "blocking" traffic
from end stations connected directly to the
switch. Back pressure is used for half duplex
and IEEE 802.3x for full duplex. Note that flow
control should not be used if a port is connected
to a hub.
mode used. (Note that auto-negotiation is not
available for 100BASE-FX ports.)
C
ONFIGURATION
P
ROGRAM
2-31