Table of Contents
Advertisement
Port Security Configuration
Use the Port Security Configuration screen to enable and configure
port security for the switch. Port Security allows you to configure
each port with a list of MAC addresses of devices that are
authorized to access the network through that port.
Parameter
Port Number
Status
MAC Address List
MAC Address
Add
Remove
Clear All
Description
The port number on the unit.
Port security can be set to three states; Enabled,
Disabled, or Learning. When set to Enabled, the
switch will drop packets from the port if the source
MAC address does not match one of the addresses in
the MAC Address list. If set to Learning, the switch
will add the source MAC address of all packets
received on the port to the authorized MAC Address
list.
A list of the current authorized MAC addresses that
can access the network through the specified port.
A specific MAC address to be added or deleted from
the list. A MAC address must be entered as 12
hexadecimal digits in the format "000000-000000" or
"000000000000" to be correctly accepted by the
system.
Adds a new MAC address to the current list.
Removes a MAC address from the current list.
Clears all the MAC addresses for the current port.
W
-B
M
EB
ASED
ANAGEMENT
3-47
Advertisement
Table of Contents
