W
-B
M
EB
ASED
ANAGEMENT
Parameter
Port
Default Ingress
User Priority
Number of Egress
Traffic Classes
Port Traffic Class Information
This switch provides two priority levels with weighted fair queuing
for port egress. This means that any frames with a default or user
priority from 0~3 are sent to the low priority queue "0" while those
from 4~7 are sent to the high priority queue "1" as shown in the
following screen.
Parameter
Port
User Priority
Class Range
3-32
Description
Numeric identifier for switch port.
Default priority can be set to any value from 0~7,
where 0~3 specifies the low priority queue and 4~7
specifies the high priority queue.
Indicates that this switch supports two priority output
queues.
Description
Numeric identifier for switch port.
Shows that user priorities 0~3 specify the low priority
queue and 4~7 specify the high priority queue.
The priority queue classes available on this switch.