Printing; Printing A Page; Executing Printing - Sharp AL-1000 Series Operation Manual

2

PRINTING

PRINTING A PAGE

The printing method is described below. Read the description with the operation manual for
the application to be used.
Before you can use your printer, you must install the printer driver which has
been supplied. Once this software has been installed, you can control the
printing of your documents from the printer driver which appears on your
computer screen. See INSTALLING THE PRINTER DRIVER SOFTWARE
on page 10.
When using multiple printers, you must change the printer setting from the
control panel to change the printer to be used. This printer cannot be used
with other GDI printers and printers that use the Windows Printing System.
For details, see USING OTHER INSTALLED DRIVERS on page 28.

Executing printing

Ensure that paper of the desired size is loaded in the paper tray. (See the section on
1
LOADING COPY PAPER in the copier operation manual.)
To print onto special paper, the bypass tray or single manual bypass can be
used. Select the bypass from the printer driver. See SETTING PRINT
CONDITIONS FROM PRINTER DRIVER on page 18. Also see the description
on the bypass in the copier operation manual. Feed special paper one sheet at
a time.
If the printer is equipped with the single manual bypass, feed the paper after a
message indicating to do so is displayed on the computer. If paper is fed into
the manual bypass before the message is displayed, copying operation will
start.
Turn on the printer. The ready (
2
Select the settings for printing such as the number of copies and paper type from the
3
application. See SETTING PRINT CONDITIONS FROM PRINTER DRIVER on page
18.
Before printing, ensure that the AL-1000 Series has been selected as the printer.
Print the file from your software application.
4
) indicator will light up.
2
17