Sharp AL-1000 Series Operation Manual page 20

Windows 95/Windows 98/Windows NT 4.0:
Click the Start button of the computer and then select Printers from Settings.
1
If you use Windows 95/Windows 98, right-click the SHARP AL-1000 Series icon in
2
the Printer folder and select Properties in the menu.
If you use Windows NT 4.0, right-click the SHARP AL-1000 Series icon in the Printer
folder and select Document defaults in the menu.
For this description, it is assumed that the mouse is configured for right hand
operation.
The properties of the SHARP AL-1000 Series printer driver will be displayed. If you
3
use Windows 95/Windows 98, click the SHARP AL-1000 Series Setup tab to display
the following screen.
OK button
All driver settings which have been
selected by each tab will be saved
and the properties will be
terminated.
SETTING PRINT CONDITIONS FROM PRINTER DRIVER
* Screen on Windows 95
Apply button
The settings which have been selected by each
tab will be saved.
* This button is not displayed on the Windows
NT 4.0
Cancel button
The settings which have been selected by each
tab will be canceled and the properties will be
terminated.
However, the settings which have been saved
will not be canceled.
Default All button
When pressed, returns
the settings which have
been selected by each
tab to their default
state.
2
19