Sharp AL-1000 Series Operation Manual page 15

INSTALLING THE PRINTER DRIVER SOFTWARE
Windows driver file search will find the device "SHARP AL-1000 Series". Click the
7
Next button. Proceed to step 9.
Insert the installation CD-ROM into the CD-ROM drive. Click the Start button and
8
select Run. When the window shown below appears, type R:\SETUP (if the CD-
ROM is designated as drive R) and click the OK button. Proceed to step 9.
1
The installation program will start. To select a different folder, select Browse and type
9
in the path and folder name where the printer driver will be installed. Click OK and
say YES to create the folder, select the Next button to continue. To install the printer
driver to the default folder, click the Next button.
On the display, you will see "printer port to be used". Normally, this is LPT1 and it is
10
selected automatically. Ensure that Yes is checked to use the printer as the default
printer. Finally click the Next button.
A "Confirm installation" window will be displayed. To continue installation, click the
11
Yes button.
When the installation is complete, you will be asked whether or not to print a test
12
page. If you wish to do so, click the Yes button. At this time, ensure that paper is
loaded in the paper tray.
If the test print completes successfully, click the Finish button. "The installation of the
13
SHARP AL-1000 Series Software is complete." window will be displayed. Click the
OK button.
14
If you have any problem with the test print, see TROUBLESHOOTING on
page 23.