Some problems in the AL-1000 Series are common to both the copier and printer features, so
also check the TROUBLESHOOTING section of the copier operation manual.
"Copier" in the column "See page:" indicates the description is in the copier
Hard disk free space is not
sufficient for installation of
the printer driver.
The operating system is not
Paper is not set correctly.
not feed into
Too much paper in the paper
The interface cable might
not be connected properly.
The interface cable is
The port setting is incorrect. Check the printer settings in the
The TD cartridge or drum
cartridge is not installed
The printer may be
The printer driver may be
*1 See the section on LOADING COPY PAPER.
Delete unnecessary files and
application software to increase hard
disk free space. (The driver requires
at least 10 MB free space.)
Use Windows 3.1x, Windows 95,
Windows 98 or Windows NT 4.0.
Insert the paper correctly.
Remove excessive paper from the
Check the interface connection.
Check the cable with a computer and
printer which you know work. If
printing is still not possible, the
interface cable is defective.
Windows Control panel to make sure
that the print job is being sent to the
correct port (for example, LPT1).
Ensure that the TD cartridge and
drum cartridge are installed properly.
Check the application to make sure
that all the print settings are correct.
Reinstall the printer driver software
and try printing a test page.