9-56 Upgrading Your Server
Installation (IDE File Devices)
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Remove the drive cover.
4.
While pulling the lever toward the right side of the server, pull the DVD-ROM drive out
of the chassis.
IMPORTANT:
removing the DVD-ROM drive. Otherwise, your fingers may be
caught.
5.
While pushing the latching tab that secures the device bay, push the device carrier out of
front of the server.
IMPORTANT:
excess force. If the tab bends, straighten it out as it was.
Do not touch any other part than release lever when
Be careful not to bend the latching tab by applying