NEC Express5800/120Ri-2 User Manual page 263

9-38 Upgrading Your Server
12.
Remove the processor from the protective cover.
IMPORTANT:
Hold the processor only at the edges, being careful not to touch the
bottom of the processor.
Do not discard the protective processor cover.
Always replace the processor cover if the processor is removed
from the socket.
13.
Hold the processor with your thumb and index fingers oriented as shown in the figure
below.
IMPORTANT:
14.
Align notches with the socket.
15.
Lower the processor straight down without tilting or sliding it in the socket.
Make sure fingers align to the socket cutouts.
Notch
Key
Notches
Pin Marker
Pin Marker