NEC Express5800/120Ri-2 User Manual page 273

9-48 Upgrading Your Server
NOTES:
Confirm that the top end of the PCI board bracket is inserted in the
designated slot of the riser card.
If a full-height PCI board is installed, confirm that the PCI board
bracket and the edge of the opposite card are inserted in the guide
rails of the riser card.
9.
Secure the board with a screw removed in Step 5.
10.
Insert the riser card into the slot on the mother board.
Align the riser card terminal section with the slot on the mother board, and firmly push the
riser card until it is fully seated.
Low-profile type Full-height type