4-18 Configuring Your Server
Console Redirection Submenu
Option
BIOS Redirection
Port
ACPI Redirection
Port
Baud Rate
Flow Control
Console Type
Remote Console
Reset
Event Log Configuration Submenu
Option
Clear All Event
Logs
Parameter
[Disabled]
Serial Port A
Serial Port B
[Disabled]
Serial Port A
Serial Port B
9600
[19.2K]
38.4K
57.6K
115.2K
None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD
PC ANSI
[VT100+]
VT-UTF8
[Disabled]
Enabled
Parameter
–
Description
Specify the address/interrupt of the
serial port to which a remote console
is connected.
Specify the serial port to which an
ACPI console is connected.
Specify the baud rate used for the
interface with successive remote
consoles.
Specify the flow control method.
Specify the type of remote console.
Specify whether to enable or disable
resetting by Escape command (Esc
R) sent from the remote console.
Description
Press Enter and select "Yes" to clear
the system event log.
Your Setting
[
]: Factory-set
Your Setting