NEC Express5800/120Ri-2 User Manual page 265

9-40 Upgrading Your Server
18.
Make sure that the heat sink is level.
NOTES:
If the heat sink is not level, remove it, and then install it again. The
following probably causes the heat sink not to be level:
– The CPU is not positioned correctly.
– All screws are not completely tightened.
Do not move the secured heat sink.
19.
Reinstall the processor duct.
NOTE:
figure above).
20.
Reinstall the support arm.
Processor duct
Place the internal USB cable onto the processor duct (see
USB cable
USB cable
Support arm