Scheduling Function Of Alert Report; Report Function Of Alert - NEC Express5800 series User Manual

Using the Alert Manager
6

Scheduling Function of Alert Report

– Report scheduling function:
Reportable time periods can be specified.
– Retry function:
If reporting fails, retry of reporting is done. Retry is specified for each reporting
destination with the retry interval and maximum retry time.

Report Function of Alert

– Manager report(SNMP, TCP/IP) function:
This function reports the alert using the SNMP or TCP/IP function.
Report contents include a detailed message, support method, and alert type.
A report can be issued to the manager under the LAN environment (In-Band report) as
well as under the WAN environment (Out-of-Band report) using a Remote Access
Service.
This function is only available for the Agent.
– Internet Mail function:
This function uses SMTP protocol to report by Internet Mail.
the Mail Server to support SMTP.
Report contents include a detailed message, support method, and alert type.
The report contents cannot be selected but the send message can be edited.
– Mail (MAPI) function:
This function uses the Microsoft Mail function to report by Mail. This function
requires an environment under which the post office of Microsoft Mail can be used.
Report contents include a detailed message, support method, and alert type.
The report contents cannot be selected but the send message can be edited.
By associating with the Microsoft information service, reporting destinations such as
Internet Mail can be expanded.
– Pager call function:
This function reports to Numeric Pager through a modem in which the AT commands
are available.
The report contents include a send message only. An initialization string of a modem
can be arbitrarily set.
This function requires