NEC Express5800 series User Manual page 47

For the destination setting, make the following setting.
[Pager Setting] dialog (Destination Setting)
– [Phone number]:
Enter a telephone number of the Pager service provider.
Numeric characters (0 to 9) can be entered and '-' can be used as a separator.
<Example> To specify telephone number "012-345-6789"
"012-345-6789" or "0123456789"
<Example> To call an outside line from an interphone, (in this example, dial number
is 0)
"0,012-345-6789"
<Explanation>
"0" 0 is dialed.
"," A constant pause is put.
Telephone number "012-345-6789" is dialed.
Make sure to specify a telephone number.
– [Message]:
A message to be sent to a pager is specified.
Make the setting as follows:
<Example> To set a message "01234"
",,,,,01234,,,#"
<Explanation>
",,,,,"
A send standby time is set
(waits until connection and announcement are made).
The pause can be adjusted according to the number of ","(pause command).
Using the Alert Manager
43