NEC Express5800 series User Manual page 58

Using the Alert Manager
54
Setting of Alert Receiving from Agent (TCP/IP)
Make the setting as follows:
[Receive from Agent (TCP/IP) Setting] dialog is used to set and modify a socket receive.
[Receive from Agent (TCP/IP) Setting] dialog
– [Port Number]:
Enter a port number used for socket receiving. This is not optional.
– [Default]:
To put the port number back to a default, press this button.
For this number, the same value must be set to the Agent and Manager (a default
value is 31134 for both of Agent and remote Manager).
Do not change the value as long as the default value works.
– [OK]:
Set information is added and this dialog closes.
– [Cancel]:
This dialog closes with no set information added.