Setting According To Other Report Receiving Method - NEC Express5800 series User Manual

Setting According to Other Report Receiving Method

Select the setting method from a list in the [Other] property sheet of [Base Setting] dialog and make
the setting in the dialog displayed by pressing the [Configure] button.
Setting of Time Elapses Before Shut Down
[Shutdown Delay Setting] dialog
– [Shutdown Delay]:
Enter the time that elapses before shut down.
The setting is available in a range of 0 to 60.
Set contents become available immediately after the setting is made.
– [Vanish 'Cancel' button]:
To vanish 'Cancel' button that shut down dialog, mark this check box.
– [Report to Manager, shutting down or rebooting]:
To report to Manager when shut down or rebooting was active, mark this check box.
– [Report to Manager, canceling shutting or rebooting]:
To report to Manager when shut down or rebooting was canceled, mark this check box.
– [OK]:
Set information is added and this dialog box closes.
– [Cancel]:
This dialog box closes with no set information added.
Using the Alert Manager
55