Using the Alert Manager
48
Writing to File
Base setting is not required.
For the destination setting, make the following setting:
[Write File Setting] dialog is used to set and modify the settings for writing the failure information
to a file.
[Write File Setting] dialog
– [File Name]:
A file name writing information is displayed.
– [File...]:
To Add or modify a file name press this button.
– [Header]:
A header comment displaying with the failure information is written.
– [Computer Name]:
To display a computer name, mark this check box.
– [Product Name]:
To display a product name, mark this check box.
– [Date]:
To display a date, mark this check box.