Setup > Simulate - Navman TRACKFISH 6600 Installation And Operation Manual

15-14 Setup > Simulate
Simulate mode is a way of becoming familiar
with the TRACKFISH (see section 2-5).
Press MENU once or more until the Setup
menu is displayed, then select Simulate:
Warning: Never have sonar or GPS
simulate mode on when the TRACKFISH is
navigating on the water.
Sonar simulation
The data from the sonar sensor is ignored and
the TRACKFISH generates this data internally
to simulate the depth of the water. Turn sonar
simulation Off or On.
GPS simulation
The data from the GPS receiver is ignored and
the TRACKFISH generates this data internally
to simulate the movement of the boat. Turn GPS
simulation Off or On.
Mode
There are two choices for Mode:
Normal
Simulates the boat moving from the
selected start point at the given speed
and heading. The options required for
Normal are:
Speed: The simulated boat speed
to use.
Heading: The simulated bearing for
the boat to follow.
Note: To select the start point, go to
the chart display before starting the
simulation. Then:
• To start the simulation from the boat
position, press ESC to switch to
centre on boat mode.
• To start the simulation from a different
TRACKFISH 6600 Installation and Operation Manual
point, move the cursor to that point on
the chart..
Tip: To calculate a heading, use the
cursor (see section 3-3).
Tip: As the boat moves, vary Heading
to simulate the boat moving off course.
Demo
Simulates the boat moving along a route
at a given speed. When it reaches one
end it retraces the route in the other
direction. Before setting this mode enter
at least one route (see section 6-2-1). The
options required for Demo are:
Speed: The simulated boat speed
to use.
Route: The route to follow.
NAVMAN
65