Editing A Route; Displaying A Route On The Chart; Deleting A Route - Navman TRACKFISH 6600 Installation And Operation Manual

ii Press MENU and select Move.
iii Move the cursor to where the waypoint
will be.
iv Press ENTER.
7 To remove a waypoint from the route:
i Move the cursor to the waypoint to
remove from the route.
ii Press MENU and select Remove. The
waypoint is removed from the route,
but the waypoint is not deleted.
8 Repeat this process until the route is
fi nished. Review the route and check
that the route does not cross land or
dangerous water.
Then press ESC.
Or, to delete the route that is being created:
i Press MENU and select Delete.
ii Select Yes to confi rm.
Tip: The distance and bearing calculator can
also be used to enter a course and save it as a
route (see section 3-3).
B. Creating a new route from the routes
display
1 In the routes display, press MENU and
select Create.
2 A new route, with a default name and no
waypoints, is displayed.
3 To change the route name:
i Select the route name at the top of the
display and press ENTER.
ii Change the name if necessary.
iii Press ENTER.
4 To insert a waypoint in the route:
i Select where the waypoint will be:
To insert the fi rst waypoint in a
new route, select Leg 1.
To insert a waypoint at the end of
the route, select the unused leg at
the end of the list of waypoints.
Otherwise, select the waypoint to
insert the new waypoint in front of.
ii Press ENTER. A list of waypoints is
displayed. Select the waypoint to use.
As waypoints are inserted, the distance
and bearing of each leg is shown
automatically. If the route has more
waypoints than will fi t on the display,
press or to see them.
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press MENU and select Remove.
TRACKFISH 6600 Installation and Operation Manual
6 Repeat this process until the route is
fi nished.
7 Press ESC.
8 Display the route on the chart (see
section 6-2-3) and check that the route
does not cross land or dangerous water.

6-2-2 Editing a route

Editing a route from the chart
1 In the routes display, select the route to
edit. Press MENU and select Edit on
chart.
2 The selected route is displayed on
the chart, with a circle around the fi rst
waypoint.
3 Edit the route as described in section 6-2-
1 A, starting at step 4.
Editing a route from the routes display
1 In the routes display, press
highlight the route to edit. Press MENU
and select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 6-2-
1 B, starting at step 3.
6-2-3 Displaying a route on the
chart
To view the selected route at the centre of
the display:
1 In the routes display, press
to highlight the route to display. Press
MENU and select Display.
Or, in the Chart display, press MENU,
select Find, then select Route. Select a
route from the list.
2 The TRACKFISH displays the selected
route on the chart.

6-2-4 Deleting a route

1 In the routes display, press
highlight the route to delete. Press MENU
and select Delete.
2 Select Yes to confi rm.
NAVMAN
or to
or
or to
29