Setup - Navman FISH 450 Tricolor Installation And Operation Manual

4 Setup

The FISH450 Tricolor is menu driven.
The Setup menu allows the FISH450 Tricolor to be
customised to each user's individual preferences.
Alarms menu (see section 4-1) is used to:
Enable or disable alarms and set the trigger
value for each alarm. Pressing the Alarm
key from anywhere will enter the Alarm
menu, provided the beeper is not active (in
which case pressing the Alarm key silences
the beeper).
Fuel setup (see section 4-2) is used to:
Set the Tank Size, adjust the fuel remaining
value (Remaining), set the fuel remaining
value equal to tank size (Tank Full), clear the
fuel log (Clear Used), set the fuel units
(Units) (L, USGAL, IMPGAL), set the number
of engines (Num Engines), calibrate the fuel
transducer (Fuel Calibration) and adjust the
flow averaging period (Flow Filter).
Depth setup (see section 4-3) is used to:
Set the depth measurement units (M, FA,
FT) and adjust Keel Offset.
Temperature setup (see section 4-4) is
used to:
Set the Temperature measurement units
(°C, °F) and calibrate the temperature.
Speed and Log setup (see section 4-5) are
used to:
Set the boat speed units (MPH KPH KTS),
calibrate the speed, reset the Trip Log and
reset all logs.
Display setup (see section 4-6) is used to:
Enable or disable the display of fish symbols
(Fish Symb), speed (Speed) and
temperature (Temp) on the Fish History,
Zoom and Sonar screens. Switch between
Trip Log and Total Log displayed on the Data
screen. Calibrate the display colours (Display
Cal, Red Cal, Blue Cal).
Key Beep (see section 4-7) is used to:
Enable or disable a single beep which
audibly confirms that a key has been
pressed.
Language setup (see section 4-8) is used to:
Set the language to one of the following:
English, French, German, Spanish, Italian,
Dutch, Swedish or Portuguese.
12
Menu operation
To display the Setup screen,
press the Menu key
more times until the Main Menu
screen appears. Press the
Cursor Up or Down key to
highlight Setup, then press the
Cursor Right key to select it.
Press the Cursor Up or Down
key to highlight an option, then
press the Cursor Right key to
select it.
Exit any Setup menu item by
pressing the Menu key. This will
display the screen one step closer to the Main Menu.
Menu structure of Setup
Main Menu
Fish History
Zoom
Sonar
Fuel
Data
Setup
NAVMAN
FISH450 Tricolor FISHFINDER Installation and Operation Manual
one or
Alarms Low Fuel
Too Shallow
Too Deep
Fish Alarm
Temperature Value
Temperature Rate
Low Battery
Fuel Tank Full
Tank Size
Set Remaining
Clear Used
Units
Num Engines
Fuel Calibrate
Flow Filter
Depth Units
Keel offset
Temperature Units
Temperature Cal
Speed & Log Units
Speed Calibrate
Log Cal
Log (Trip/Total)
Zero Trip Log
Zero all logs
Display Fish Symbol
Speed
Temperature
Display Calibrate
Red Calibrate
Blue Calibrate
Key Beep
Language