Deleting All Routes; Navigating A Route; Starting A Route; Skipping A Waypoint In A Route - Navman TRACKFISH 6600 Installation And Operation Manual

6-2-5 Deleting all routes

1 In the routes display, press MENU and
select Delete all.
2 Select Yes to confi rm.

6-3 Navigating a route

6-3-1 Starting a route

To start the boat navigating along a route:
1 In the routes display, press
highlight the route to use. Press MENU
and select Start.
Or, from the chart or highway display,
press GOTO/AUTO and select Route,
then select a route from the list.
2 The TRACKFISH asks for the direction to
traverse the route.
Select Forward (the order the route was
created) or Reverse.
3 It displays a chart with the route marked and
starts navigating from the start of the route.
Warning: Make sure the course does not
pass over land or dangerous waters.
The TRACKFISH navigates along the route as
described in section 3-1.
30
6-3-2 Skipping a waypoint in a
route
To skip a waypoint when the boat is navigating
or to
along a route:
The TRACKFISH starts navigating straight
towards the next waypoint on the route.
the autopilot on might result in a sudden
course change.

6-3-3 Cancelling a route

To stop the boat navigating along a route:
NAVMAN
In the chart display, press MENU and
select Skip.
Warning: Skipping a waypoint with
In the chart display, press MENU and
select Cancel route.
TRACKFISH 6600 Installation and Operation Manual