Ricoh 4051 Operating Instructions Manual page 52

Document Server
When using a name registered in
the Address Book
A Select a name from the list, and
then press [OK].
3
To change to an unregistered
user name, proceed to the next
step.
Reference
See p.73 "Registering a New
User Code".
When using an unregistered user
name
A Press [Non-programmed Name].
B Enter a new user name, and
then press [OK].
Reference
See p.135 "Entering Text".
When no names are registered in
the Address Book
A Enter a new user name, and
then press [OK].
Reference
See p.135 "Entering Text".
40
To change a file name
A A A A
Press [Scan Original].
The Scan Original display appears.
B B B B
Press [File Name].
The Change File Name display ap-
pears.
C C C C
Press [Delete All] to delete the old
file name.
Note
❒ You can also use [Backspace] to
delete unwanted characters.
D D D D
Enter a new file name, and then
press [OK].
Note
❒ Up to 20 characters can be en-
tered as a file name, but only 16
characters of each file name will
be displayed in the document
list.
Reference
See p.135 "Entering Text".
To set or change a password
A A A A
Press [Scan Original].
The Scan Original display appears.
B B B B
Press [Password].