Tray Paper Settings - Ricoh 7025 Operating Instructions Manual

System Settings

Tray Paper Settings

This section describes User Tools in the Tray Paper Settings menu under System
Settings.
Default settings are shown in bold type.
Important
2
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Tray Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray.
• You can select the following paper sizes for Tray 1, 3, and 4:
Auto Detect, A3L, B4JIS (Japanese Industrial Standard)L, A4KL,
B5JISKL, B6JISL, A5KL, A6L, 11" × 17"L, 8
" × 14"L, 8
1
8 /
4
" × 8
1
5 /
2
The default setting is Auto Detect.
• You can set custom size paper of the following dimensions in Tray Paper
Size for Tray 1, 3, and 4:
Vertical: 100.0 to 297.0 mm (3.94 to 11.69 inch), Horizontal: 148.0 to 432.0
mm (5.83 to 17.00 inch)
• You can select the following paper sizes for Tray 2:
Auto Detect, A3L , B4JISL, A4KL, B5JISKL, B6JISL, A5KL, A6L,
11" × 17"L, 8
" × 11"KL, 7
1
8 /
2
C5EnvL, C6EnvL, DLEnvL, 8KL, 16KKL, Custom Size.
The default setting is Auto Detect.
• You can set custom size paper of the following dimensions in Tray Paper
Size for Tray 2:
Vertical: 100.0 to 297.0 mm (3.94 to 11.69 inch), Horizontal: 148.0 to 432.0
mm (5.83 to 17.00 inch)
❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The setting specified here is also applied to [Auto Paper Select] in Printer Fea-
tures.
• The paper types you can set for the bypass tray are as follows:
No Display (Plain Paper), Thick Paper, OHP (Transparency)
The default setting is Thick Paper.
14
" × 13"L, 8" × 13"L, 8
1
/
4
1
/ "L, 8KL, 16KKL, Custom Size.
2
" × 14"L, 8
1 1
/ /
2
" × 10
1 1
/ / "KL, 5
4 2
" × 11"KL, 7
1
/
2
" × 13"L, 8 " × 14"L, 8
1
/
2 4
" × 8
1 1
/ / "L, 4
2 2
" × 14"L, 8 " × 13"L,
1 1
/ /
2 2
" × 10
1 1
/ /
4
" × 13"L, 8" × 13"L,
1
/
4
" × 9 " × 7
1 1 7
/ / "L, 3 /
8 2 8
"KL,
2
1
/ "L,
2