Ricoh 7025 Operating Instructions Manual page 36

Copier Features
• Special Mode 3
photo images created by dithering (visible dots), such as newspaper pho-
tos - normal resolution
• Special Mode 4
photo images created by dithering (visible dots), such as newspaper pho-
tos - coarse resolution
• Special Mode 5
normal text originals (reproducing the background)
The default setting for Original Type 1 (Text) is Text Mode 1.
The default setting for Original Type 2 (Photo) is Photo Mode 1.
3
❖ Duplex Mode Priority
You can select the type of Duplex function effective when the machine is
turned on, reset, or modes are cleared.
The default setting is 1 Sided→2 Sided.
❖ Orientation
You can select the original orientation when using the Combine/Series/Du-
plex, or Staple function.
When you select [Always Specify], you must select the orientation of originals.
The default setting is Do not Specify.
❖ Max. Number of Sets
The maximum copy quantity can be set between 1 and 999 using number
keys.
The default setting is 99 sheets.
❖ Original Count Display
You can set to display the count of originals and copying pages on the display
when [On] is selected.
The default setting is Off.
❖ Reproduction Ratio
You can select which reduce, enlarge, or input ratio is shown on the display
with priority when [Reduce] or [Enlarge] is selected.
Reduce or Enlarge ratios for setting are as follows:
The default setting for Ratio 1 is 50% (Metric version) / 50% (Inch version).
The default setting for Ratio 2 is 71% (Metric version) / 65% (Inch version).
The default setting for Ratio 3 is 82% (Metric version) / 78% (Inch version).
The default setting for Ratio 4 is 93% (Metric version) / 93% (Inch version).
The default setting for Ratio 5 is 122% (Metric version) / 121% (Inch version).
The default setting for Ratio 6 is 141% (Metric version) / 129% (Inch version).
The default setting for Ratio 7 is 200% (Metric version) / 155% (Inch version).
❖ Preset R/E Priority
You can set the ratio with priority when [R/E] is selected.
Using the number keys, enter the ratio from "50-200" in units of 1%.
The default setting is 71% (Metric version) / 65% (Inch version).
30