Operating The Fbkr18 Series Rethermalizer; Fbkr18 Temperature Display Options - Frymaster Gas Rethermalizers FBKR18 Series Installation & Operation Manual

Frymaster gas rethermalizers installation, operation, service, and parts manual
Table of Contents

Advertisement

Remember: Stir time 2 must be greater than stir time 1 (or else be "0"). Stir time 3
must be greater than stir time 2 (or else be "0"). None of the stir times should be
greater than the rethermalizing time entered in Step 6. If a stir time exceeds the
rethermalizing time, the stir alarm will not sound.
8. SELP (Select Product) again appears in the left display. Return to Step 5 and follow all
instructions to program more products.
9. Lock in the programming by pressing the Temperature Check/Program Lock Switch
O
FBKR18 S
PERATING THE
Turn the computer on by pressing the Power
in either LED Display indicates that the element is energized.
1. One of the following is displayed:
a. °-Lo, indicates the cookpot temperature is 11ºF (6ºC) lower than the setpoint.
b. °-HI, indicates the cookpot temperature is 11ºF (6ºC) higher than the setpoint.
- - - -
c.
(four dashes), indicates the cookpot temperature is in the rethermalizing range.
d. HELP, indicates a heating problem.
e. Prob, indicates a problem with the computer temperature probe circuit.
2. Press a product button to initiate a rethermalizing cycle.
a. The programmed rethermalizing time appears and the timer countdown will begin.
b. Stir alarms, if programmed, will sound, the display will read Stir, and the LED in the
product button will blink. Press the indicated product button to cancel the alarms.
Pressing the product button twice while the alarm is active will cancel the
rethermalizing cycle as well as the alarm.
c. An alarm sounds at the end of the cycle. COOC is displayed, and the associated product
button flashes. To cancel the alarm, press the flashing button.
3. Press the Temperature Check
twice to check the setpoint.
4. During idle periods, four dashes (
cookpot is at setpoint.
FBKR18 T
EMPERATURE
R
ERIES
ETHERMALIZER
CAUTION
switch once to check the cookpot temperature. Press the switch
- - - -
) should appear in both displays, indicating that the
D
O
ISPLAY
PTIONS
switch. NOTE: A decimal between digits 1 and 2
3-6
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gas rethermalizers fbcr18Fbcr18 series

Table of Contents

Save PDF