M3000 Computer Instructions - Frymaster GEN II LOVTM BIELA14 Operator's Manual

BIELA14 SERIES GEN II LOV™ ELECTRIC FRYER
CHAPTER 4: M3000 COMPUTER INSTRUCTIONS
Cook Channel
and Selection
Buttons
ON/OFF
4.1 M3000 General Information
Welcome to the M3000, a computer that retains the one-button ease of the M2000 and 100B and the
utility of 40-product menu capability. The computer is easy to use. One button push starts a cook
cycle for an item cooked in a dedicated vat. The same flexible computer on a multi-product vat
requires only two button pushes to
launch a cook cycle. Just choose a
menu item on a product button and
press, and then press a cook channel
button under the display showing
the desired item. The computer can
move seamlessly from McNuggets
to Crispy Chicken to any added
menu item.
In a typical store setting, the
M3000s on the three-vat fry station
display FR FRIES (shown above)
and will launch a cook cycle with
one push of a cook channel button.
On the chicken/filet station, the
LED display shows dashed lines.
To launch a cook cycle, press a
product button and then press the
cook channel button that
corresponds with the location of the
dropped basket. By pressing the product button for McChicken, McChick will appear in the display.
Just press the cook channel button corresponding to the location of the appropriate dropped basket.
The M3000 will operate with electric and gas fryers, both full- and split-vat.
FR FRIES
Pressing product buttons 3 or 9 displays McChick.
Pressing either cook cycle button under the McChick
displays launches a cook cycle.
Filter, Temp, Info,
Programming and
Navigation Buttons
FR FRIES
Product Buttons
4-1
Heat
Indicator
Lamp
ON/OFF