Advertisement
4. DAILY OPERATION
4.1 OPENING:
visually check that the power switch and
the thermostat are "OFF".
CAUTION
If electrical power service is disrupted for
more than a few seconds, turn fryer OFF.
This will prevent the fryer from accidentally
heating oil when power service is resumed.
4.2 GENERAL USE:
a. For
consistent
convenience and long-term savings,
use
a
high-quality
compound.
WARNING!
IF USING SOLID SHORTENING,
NEVER MELT A BLOCK OF
SHORTENING BY SETTING IT
WHOLE
IN
VESSEL. THIS IS DANGEROUS
AND CAN EASILY CAUSE THE
SHORTENING
DAMAGE TO THE ELEMENTS
OR POSSIBILY A FIRE.
b. Although a temperature of 177°C
(350°F) is recommended for most
cooking operations, set the fryer at the
lowest possible temperature which
produces a high-quality end product
while ensuring maximum life of frying
compound.
c. When the fryer is not in use, the
thermostat should be set lower than that
used during cooking.
At opening time, always
quality
product,
liquid
frying
THE
FRYER
SCORCHING,
4.3 TURN ON PROCEDURES:
a. If fryer is empty, pour enough
shortening into the vessel to fill the
vessel to the "oil level" line scribed on
the rear wall. If solid shortening is to
be used, melt enough in a separate
container to cover the heating elements
in the bottom of the vessel, then melt
the rest in the vessel by turning power
switch off and on.
b. Turn the power switch on; set
temperature
(350°F). In less than 30 minutes, the
frying compound temperature will
stabilize and be ready for production.
4.4 FILTERING:
a. General:
assures a better taste to the food,
minimizes flavors being transferred
from batch to batch, and increases
frying compound lifespan.
Filter the frying compound at least
once daily or more frequently if
cooking is heavy.
b. Prior to filtering, align the portable
filter unit under the drain valve.
Attach the drain valve extension to
ensure shortening flows into the filter
safely.
c. If using solid shortening, clear return
lines before turning off the filter motor
and hang any flexible lines up to drain.
As it cools, solid shortening solidifies
and clogs lines.
d. For
more
concerning
operator's manual shipped with your
filter unit.
10
controller
to
177°C
Filtering
the
shortening
detailed
information
filtration,
review
the
Advertisement
