Clock/Timer; Clock/Timer Setting Mode; Entering Clock Setting Mode; Entering Timer Setting Mode - Philips MC-90 User Manual

STANDBY-ON
ECO
POWER
iR
M C -
PREV PRESET PRESET
PLAY/
STOP PAUSE
PROG
NO
Cancel
EDIT TEXT
SEARCH/ SEARCH/
TUNE TUNE
JOG CONTROL
IMPORTANT!
When in Eco Power standby mode, it is not
possible to operate the clock or timer
function.

Clock/Timer setting mode

1
Press and hold CLOCK/TIMER until
"SELECT TIMER OR CLOCK" is displayed.
2
If necessary, adjust the MASTER VOLUME to
select :
"TIMER" : for timer setting mode.
"CLOCK" : for clock setting mode.
3
Press CLOCK/TIMER again to confirm the
selection.
OR

Entering clock setting mode

Press and hold CLOCK on the remote control
until "CLOCK" is displayed.
starts flashing.

Entering timer setting mode

Press and hold TIMER on the remote control
until "TIMER" is displayed.
and start flashing.
ALARM
pg 001-038/MC90/22-Eng
C D R E C O R D A B L E M I C R O S Y S T E M
CD 1•2•3 CDR
NEXT
REC LEVEL
AUX
TUNER
COPY CD
YES BASS
Enter
COMPILE CD RECORD
RDS/
NEWS/
CD TEXT
FINALIZE ERASE
MASTER VOLUME
CD CD
1
2
3
4
5
6
33

Clock/Timer

CLOCK/TIMER
TREBLE
DISPLAY
CDR OPEN•CLOSE

Clock setting

The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example)
Enter clock setting mode (refer to
"Clock/Timer setting mode").
Press PROG repeatedly to select 12-hour or
24-hour clock mode.
The clock digits for the hours start flashing.
Adjust MASTER VOLUME to set the hours :
clockwise for hours up; anti-clockwise for hours
down.
Press CLOCK/TIMER (or CLOCK on the
remote control) to confirm hours.
The clock digits for the minutes start flashing.
Adjust MASTER VOLUME to set the
minutes.
Press CLOCK/TIMER (or CLOCK on the
remote control) again to store and exit the
setting.
The clock will start working.
To exit without storing the setting
Press Çon the system.
1/29/02, 6:38 PM
33
3139 115 20972