Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MC-320 User Manual

Setting the clock

1
In standby, press and hold
➜ The clock digits for the hours flash.
2
Press VOLUME –/+ to set the hours.
3
CLOCK SET /
Press
➜ The clock digits for the minutes flash.
4
Press VOLUME –/+ to set the minutes.
5
CLOCK SET /
Press
Note:
– The clock will only be displayed without
backlight in standby.
CLOCK SET /
.
again.
to confirm the time.

Setting the timer

G The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
G You can also use it to record a favourite tuner
programme at a set period (see "Recording
timer")
G During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER SET /
system for more than 2 seconds.
2
Press SOURCE to select sound source.
➜ Display sequence shows CD, TUNER, TAPE or
REC TUN.
3
Press TIMER SET /
mode.
➜ Display sequence scrolls SET ON TIME and
flashes. The clock digits for the hours flash.
4
Press VOLUME –/+ to set the hours.
5
Press TIMER SET /
➜ The clock digits for the minutes flash.
6
Press VOLUME –/+ to set the minutes.
7
Press TIMER SET /
➜ The timer is now set and activated.
Activating and deactivating
TIMER
G In standby or during playback, press
TIMER ON / OFF on the remote control
once.
➜ Display shows
if activated, and disappears
if deactivated.

Clock/Timer

on the
to confirm your desired
again.
to confirm the time.
19
MC-320/37-1