Basic Functions; Plug And Play - Philips MC-90 User Manual

STANDBY-ON
ECO
POWER
iR
M C -
PREV PRESET PRESET
PLAY/
STOP PAUSE
PROG
NO
Cancel
EDIT TEXT
SEARCH/ SEARCH/
TUNE TUNE
JOG CONTROL
IMPORTANT!
Before operating the system, complete the
preparation procedures.

Plug and Play

Plug and Play allows you to store all available
RDS stations and radio stations automatically.
First time setup/power up
1
When you turn on the main supply,
"AUTO INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
"INSTALL" is displayed, followed by "TUNER"
and "AUTO".
starts flashing.
PROG
The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM, MW
and LW bands respectively. Weak RDS stations
may be stored in later presets.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
pg 001-038/MC90/22-Eng
C D R E C O R D A B L E M I C R O S Y S T E M
CD 1•2•3 CDR
NEXT
REC LEVEL
AUX
TUNER
COPY CD
YES BASS
Enter
COMPILE CD RECORD
RDS/
NEWS/
CD TEXT
FINALIZE ERASE
MASTER VOLUME
CD CD
3
1
2
15

Basic Functions

CLOCK/TIMER
TREBLE
DISPLAY
CDR OPEN•CLOSE
The system will proceed to set the RDS clock if
the first preset is an RDS station.
"INSTALL" is displayed, followed by "TIME"
and "SEARCH RDS TIME".
When RDS time is read, "RDS TIME" is
displayed and the current time will be stored.
If RDS station does not transmit RDS time
within 90 seconds, the programme will exit
automatically and the display will show
"NO RDS TIME".
If the first preset is non-RDS station;
The programme will exit automatically.
To reinstall Plug and Play
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
PressÉ Å again to start installation.
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
Press Çon the system.
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
1/29/02, 6:37 PM
15
3139 115 20972