(Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V. (Name / Nom de l’entreprise) (address / adresse) ...MCi730/12, /05...
Contents 1 Important Safety-Important notes for users in the U.K. Safety Environmental notices Recycling Trademark notice 2 Your MCi730 Introduction What’s in the box Overview Top and front view Rear view Remote control Touch screen Home screen Text entry on the remote control 13 3 Prepare Install batteries into the remote control 15 4 Connect...
Network settings Setup network Location and time zone Language Device information Check for software upgrades Restore factory settings 12 Register MCi730 with Philips Benefits Register MCi730 Register on the web site Register on the device Unregister MCi730 Check registration information...
1 Important Safety-Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 3 Amp, A.S.T.A.
n This product may include batteries. Please refer to safety and disposal instructions for batteries in this user manual. o This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. Please refer to disposal instructions in this user manual.
Class II equipment symbol: This symbol indicates that this product has a double insulation system. This apparatus includes this label: Modifications Modifications not authorized by the manufacturer may void user’s authority to operate this product. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
2 Your MCi730 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction MCi730 can • Connect to the existing home network, which can consist of computers and UPnP devices;...
Overview Top and front view Press to turn on the set; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. Disc compartment USB port for the USB mass storage device MP3-LINK 3.5mm audio input jack...
Rear view see ‘Connect’ on page 16 ~ AC IN for AC power cord AUX IN R / L Audio input sockets for an external audio device to play through the speakers on MCi730 DEMO for the use by dealers only ETHERNET for the Ethernet cable that connects MCi730 with home...
Remote control Press to turn on the unit; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. Open or close the disc compartment. FAVORITE In [Internet Radio] mode: Add current station to the list of Favorite Stations.
Increase/decrease the volume Alphanumeric buttons For text entry CLEAR Press to delete the previous entry; Press and hold to delete all entries. Press to switch between lower and upper cases; In FM RADIO mode, press in the list of presets to start editing station name.
Home screen On MCi730, you enter Home screen after the first-time setup is complete. To select a music source, or enterthe[Settings]menu • On Home screen, tap on through icons. Tap on the corresponding icon to select. • Or, press / /OK on the remote control to select the desired source.
• To enter symbols, press • To enter space, press • To switch between lower and upper cases, press • To delete previous character, press To delete all entries, press and hold • For languages other than English, letters that an alphanumeric button corresponds to may vary.
3 Prepare Install batteries into the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased battery life! Never mix different brands or types of batteries. •...
4 Connect Connect speakers On MCi730, ensure that you connect the left speaker to LOUDSPEAKERS L+, L- and right speaker to LOUDSPEAKERS R+, R-. To connect the speakers, • As shown, unscrew to loosen the connectors; • Fully insert the ends of speaker wires, red end into the red connector, and silver end into the black connector;...
Turn on/off Connect power supply Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product. MCi730 to the power supply. • Connect Note • The type plate information is located at the back or at the underside of the product.
5 First-time setup The first time you turn on MCi730, Select the desired language on the screen as prompted. Select your location and time zone from the list as prompted. Select [Yes], when asked whether to set up network connection. Connect to home network Connect wirelessly Connect through an Ethernet cable...
You can connect MCi730 to home network in different ways, wireless or wired. • Use a router (or Access Point) for home network. That is, connect computers/ devices to a router. MCi730 to the router wirelessly • Connect or through an Ethernet cable. •...
• To use PIN (Personal Identification Number) as the setup method: On MCi730, select [Wireless (WiFi)] > [Pin entry (WPS – PIN)], and write down the PIN that is displayed on MCi730; On the router, enter the PIN. • Consult the user manual of the router to learn how to enter the PIN the router.
Select the desired Wi-Fi network. As prompted, enter the encryption key to the network. » The unit starts to acquire an IP address assigned by the Wi-Fi network automatically. A message appears when the » connection is completed successfully. Enter key Successfully connected to Network A...
Wireless (W Wired (Ethernet) • The router may fail to assign an IP address, if the DHCP (Dynamic Host Configuration Protocol) is unavailable or disabled on the router. Connect to the Internet • Connect to the Internet as prompted. You enter Home screen after the »...
6 Play from home network Play Internet radio stations To play Internet radio stations, ensure that • MCi730 is connected to the Internet over the home network. • Ensure that the router connects to the Internet directly and no dial-up is required on the computer.
By registering MCi730 (see ‘Register MCi730 with Philips’ on page 39)on www.philips. com/welcome, you can log in to Club Philips. On Club Philips, you can do the following to manage the Internet Radio on a computer: • Edit favorite stations;...
Manually add stations Through Club Philips, you can manually add Internet radio stations to MCi730 on a computer. On a computer, log in to Club Philips (see ‘Register MCi730 with Philips’ on page 39). To add a station, click [Streamium management] >...
Click [Save]. A station is manually added the below » the edit boxes. To edit an added station • As shown, click the station. The text boxes are filled, showing » the information about the station. • Click on the text boxes to edit the information.
Stream from a computer or Network-attached storage (NAS) You can stream music from computers or Network-attached storage(NAS) to MCi730, when MCi730 is connected to home network; • • Music sharing is set up on the computers that are also connected to the home network, if you want to stream music from the computers;...
On computers: Set up music sharing On the computer, insert the supplied software CD. Install the software by following screen instructions. • Media Browser (on a PC) TwonkyMedia Server (on a MAC) • Now, the computer can work as » a music server.
On the list of options, • Tap on the screen to show functional buttons; • Select options by tapping on corresponding buttons: : Tap to scroll upward; : Tap to scroll downward; : Tap to go back to previous screen. •...
7 Play from a USB mass storage device Connect a USB mass storage device On MCi730, you can play music stored on a USB mass storage device. To do so, do the following: • Connect the USB mass storage socket on MCi730; device to the [USB] on the Home screen •...
8 Play music CDs Caution • Never look at the laser beam inside the unit. • Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. • Never put any objects other than discs into the disc compartment.
Use the touch screen during CD play On the CD play screen, • Tap on the screen to show functional buttons; • Select play options by tapping on corresponding buttons: / : Tap to pause or play current song; : Tap to select previous/next song; : Tap to play all songs in current folder randomly;...
9 Play FM radio Tune to FM radio stations Note • For optimal reception, fully extend and adjust the position of the antenna. Autostore On MCi730, tap [FM radio] on Home screen. • Or, on Home screen, press OK on the remote control. In [FM radio], select [Auto store].
10 Play from an external audio device MCi730 allows you to play an external audio device (e.g. a portable media player, another audio system) through the speakers of MCi730. Play from a portable media player Ensure that the portable media player is properly connected (see ‘Connect external audio devices’...
11 Settings Sound settings On MCi730, you can select different sound settings in [Settings] > [Sound settings]. From Home screen, go to [Settings] > [Sound settings]. Select the option. Press OK to turn it on or off. • Or, tap on the check box to select/ deselect.
To set the alarm time, • Press and hold / , or press / repeatedly until you reach the desired digits. Press / to select the entry location. Press OK to confirm. • Or, enter the desired digits by pressing the numeric buttons. The alarm icon »...
Manual setting Turn on the unit, if necessary. From Home screen, select [Settings] > [Clock settings] >[Date and time]. In [Date and time], select [Current date and time] > [Manual]. To enter date and time, • Press to select the entry location;...
• [Settings] >[Check for software upgrades] > [Check USB device] is for the use of Philips service centers. Restore factory settings You can restore MCi730 to factory settings. The factory settings are restored and your own settings are cleared, including the settings of network, sound, display, clock, alarm and language.
• To log in to Philips online services later, use the web site link in the email, and the password. Unregister MCi730 When registering with www.philips.com/ welcome, you can only use one account for one unit (e.g. MCi730). For each account, you can maintain a set of favorite stations and manually added stations.
14 Technical data General AC Power (Main unit) 230V ±10%, 50Hz (for /12, /05 /79) Dimensions Main unit: 247 x 279 x 172.6mm (including LCD) Speaker box: 160.6 x 233 x 260.8 mm Weight (net) 8.6kg (all items) Power consumption Active (On) <...
Wireless Wireless standard 802.11b/ g Wireless security WEP (64 or 128 bit), WPA / WPA2 (8-63 characters) Frequency range 2412 - 2462 MHz (CH1-CH11) (for /79, /37, /55, /97) 2412 - 2472 MHz (CH1-CH13) (for /12, /05) Antenna 1 x internal / 1 x external, diversity mode enabled Wireless protected setup (WPS) Yes (PBC + PIN)
USB port type Type A, Host Supported media FAT, FAT-32 Supported class MSC only (no MTP support) Multi-partition support No, only first readable partition Database support Up to 1000 songs Display/Clock Resolution 320 x 240 dots (QVGA), Color TFT Size 3.5 inches Backlight Can be turned on/ off and can be dimmed...
50-100m. Reposition the devices if you experience transmission problems. I have not received any registration email from ConsumerCare@Philips.com. • Check that the email address that is entered in the user registration section is valid and spelled correctly.
Limitations on Access to Streams. Philips does not guarantee access to any particular stream or to the content contained in any stream. Philips may, in its discretion, add or remove access to any specific stream or content at any time. Some streams are accessible through arrangements with online service providers which determine which streams are listed on their directories.
Most of that software is contained in the Device and is not accessible to you. Some of that software is owned by Philips and some is owned by others. Your use of software owned by Philips is subject to these Terms and Conditions of Use and any applicable license agreement.
Software, but you do not acquire any rights, express or implied, in the Software other than those specified in this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including all patents, copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is protected by copyright laws, international treaty provisions, and other intellectual property laws.
6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall terminate (i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii) upon destruction of all copies of the Software and related materials provided to you by Philips hereunder.
Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.
This product contains the following open source software packages, which are subject to their respective licenses. Philips hereby offers to deliver, upon request, a copy of the corresponding source code for the packages for which such offer is requested. This offer is valid up to three years after the product is purchased or firmware is downloaded.
---------------------------------------- GPL V2 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"...
you distribute copies of the library, or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code.
GNU LIBRARY GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Library General Public License (also called "this License").
(For example, a function in a library to compute square roots has a purpose that is entirely well- defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities.
copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the library's name and a brief idea of what it does.> Copyright (C) <year>...
library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software".
Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net January 3, 2010 ---------------------------------------- OpenSSL 0.9.8b <http://www.openssl.org/>, licensed under both OpenSSL License and Original SSLeay license, OpenSSL License --------------- /* ============================================================= * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * 1.
OF THE POSSIBILITY OF SUCH DAMAGE. * ============================================================= ======= * This product includes cryptographic software written by Eric Young (email@example.com). This product includes software written by Tim Hudson (firstname.lastname@example.org). Original SSLeay License ----------------------- /* Copyright (C) 1995-1998 Eric Young (email@example.com) * All rights reserved.
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * The licence and distribution terms for any publically available version or derivative of this code cannot be changed.
Portions of this software are copyright ?<year> The FreeType Project (www.freetype.org). All rights reserved. """ Please replace <year> with the value from the FreeType version you actually use. Legal Terms =========== 0. Definitions -------------- Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release.
unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'.
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.