Repeat And Shuffle; Repeat Play; Random Play; Cd Text Display - Philips MC-90 User Manual

Repeat and Shuffle

You can select and change the various play
modes before or during playback.

Repeat play

1
Press REPEAT on the remote control
repeatedly to select :
– to repeat playback of the
REP TRACK
current track or programme.
– to repeat playback of the current
REP DISC
disc.
– to repeat playback of all available
REP ALL
discs or programmes.
2
To resume normal playback, press REPEAT
until the "REPEAT OFF" is displayed.
disappears.
REP

Random play

1
Press SHUFFLE on the remote control.
is shown.
SHUF
All the available discs (in CD changer and
recorder) or programmed tracks (if programme
is active) will be played in random order.
2
To resume normal playback, press SHUFFLE
again.
disappears.
SHUF
Notes:
– During programme play or shuffling mode, it is
not possible to repeat playback the current disc
only (Repeat Disc mode).
– Pressing the CD or CDR OPEN•CLOSE button
will cancel all repeat and shuffling modes.
pg 001-038/MC90/22-Eng
CD Changer/Recorder Operations

CD text display

This feature allows you to display information
such as album title or track title contained on a
specially encoded CD.
Press RDS/NEWS/CD TEXT (or CD TEXT/
EDIT on the remote control) repeatedly to see
the following information (if available).
CD TEXT
scrolled once.
In stop mode
In stop mode,
adjust JOG CONTROL
During playback

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
1
Load the desired disc(s) on the disc tray(s) (refer
to "Loading Discs").
2
Press PROG to start programming.
PROG
3
Press CD 1•2•3 or CDR to select a disc.
4
Adjust JOG CONTROL (or pressí or ë
on the remote control) to select a desired track
or all tracks to programme.
If selected "CD ALL", all tracks of the disc will
be programmed.
For MP3-CD only
Adjust JOG CONTROL (or pressí or ë
on the remote control) to select a desired album
to programme. To programme a track, press
YES and then adjust JOG CONTROL to
select a desired track from the album.
Note:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
5
Press YES to store the selection.
Press NO will clear the current track selection
and back to the previous track in the
programme.
21
is shown and the information is
Album Title î Album Artist
Track Artist î Track Title
Album Title î Track Artist î Track Title
starts flashing.
3139 115 20972
1/29/02, 6:37 PM
21