Changing The Programme; Erasing The Programme - Philips MC-90 User Manual

CD Changer/Recorder Operations
6
Repeat steps 3–5 to store other discs and
tracks.
7
To end programming, press Ç once .
stays and the programme mode
PROG
remains active.
The total number of tracks programmed and
the total playing time are displayed.
8
To start programme play, pressÉ Å .
"PLAY PROGRAM" is displayed.
Notes:
– If the total programmed playing time is more
than 320 minutes, "--:--" is displayed.
– If you attempt to programme more than 99
tracks, "PROGRAM FULL" is displayed.
– In programme mode, pressing the CD DIRECT
1/2/3 buttons on the remote control will play the
selected disc and the stored programme will be
ignored temporarily. The programme will resume
when playback of the selected disc ends.
– During programming, if no key is pressed within
20 seconds, the system will exit the Programme
mode automatically.
To review the programme
Stop playback and adjust JOG CONTROL (or
pressí or ë on the remote control).
To exit review mode, press Ç.

Changing the programme

1
Press PROG.
2
Press à or á to move to the track number
you want to change.
3
To remove the track from the programme;
Refer to "Erasing the programme".
To insert a new track;
Adjust JOG CONTROL to select a new track
and press YES to confirm.
The new track will be inserted in front of the
selected track.
22
pg 001-038/MC90/22-Eng

Erasing the programme

To erase a track
1
Stop playback and press CD 1•2•3 or CDR to
select a disc.
2
Press PROG.
3
Press à or á to select a track number.
4
Press NO to erase the selected track from the
programme.
"CLEARED" is displayed.
The following programme tracks' numbers
are decreased by one.
To erase the entire programme
1
Stop playback and press NO.
"CLEAR PROG?" is displayed.
2
Press YES to erase the entire programme.
PROG
displayed.
Note:
– The programme will be erased when the system
switched to standby mode, disconnected from the
power supply or when the disc tray is opened.
22
disappears and "PROG CLEARED" is
3139 115 20972
1/29/02, 6:37 PM