Sleep Timer Setting - Philips MC-90 User Manual

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press SLEEP on the remote control repeatedly
to select a preset amount of time.
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 ...
"SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
is shown, except for "OFF" mode.
SLEEP
The Sleep Timer is now set. Before the
system switches to standby mode, a countdown
of 10 seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™
"SLEEP 1" ™ "SLEEP"
To check the remaining length of time
after sleep timer is activated
Press SLEEP once.
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
The display will show the next sleep timer
options.
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
pg 001-038/MC90/22-Eng 35
Clock/Timer
3139 115 20972
1/29/02, 6:38 PM
35