Clock/Timer
DISPLAY/BAND
Setting the clock
1
In standby, press CLOCK SET.
➜
The clock digits for the hours flash.
2
Press TUNING 4 ¢ to set the hours.
3
Press CLOCK SET again.
➜
The clock digits for the minutes flash.
4
Press TUNING 4 ¢ to set the minutes.
5
Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
1
In standby or active mode, press TIMER for
more than 2 seconds.
2
Press TUNING 4 ¢ to select sound
source.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
14
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER once.
➜
Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
●
Press SLEEP on the remote
control once or more.
➜
Display shows SLEEP and
one of the sleep time options in
sequence: 60, 45, 30,15, 0, 60...
if you have selected a time.
●
To deactivate, press STANDBY ON on the
system or remote control.
➜
SLEEP disappears from the display.
if activated, and disappears if
SLEEP
TIME