Basic Functions; Plug And Play - Philips MC-90 Manual

STANDBY-ON
DIM
iR
M C -
PREV PRESET
PLAY/
STOP PAUSE
PROG
NO
Cancel
EDIT TEXT
SEARCH/ SEARCH/
TUNE TUNE
JOG CONTROL
IMPORTANT!
Before operating the system, complete the
preparation procedures.

Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply,
"AUTO INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
"INSTALL" is displayed, followed by "TUNER"
and "AUTO".
starts flashing.
PROG
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
pg 001-039/MC90/37-Eng
C D R E C O R D A B L E M I C R O S Y S T E M
CD 1•2•3 CDR
PRESET NEXT
REC LEVEL
TUNER AUX
COPY CD
YES BASS
Enter
COMPILE CD RECORD
CD TEXT
FINALIZE ERASE
MASTER VOLUME
CD CD
1
2
17

Basic Functions

CLOCK/TIMER
TREBLE
DISPLAY
CDR OPEN•CLOSE
To reinstall Plug and Play
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
PressÉ Å again to start installation.
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
Press Çon the system.
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialize the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" is displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
1/30/02, 8:58 AM
17
3139 115 20961