IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY -ON y (POWER y on the
remote).
➜ The system will switch to the last selected
source.
To switch the system to standby mode
● Press STANDBY -ON y (POWER y on the
remote).
➜ The volume level (up to a maximum volume
level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 30 minutes after a tape or CD
playback has ended and no control is operated.
Basic Functions
Adjusting volume and sound
Press VOLUME 3/4 to
1
increase or decrease
volume.
➜ Display shows the
volume level UoL and a
number from 0-40.
2
Press DBB to switch bass
enhancement on or off.
➜ Display shows: DBB if
the DBB is activated.
3
Press DSC on the remote to repeatedly to
select the desired sound effect: CLASSIC, JAZZ,
POP or ROCK.
4
Press MUTE on the remote control to stop
sound playback instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls.
11