Chapter 5 Thermostat Controller Operating Instructions - Frymaster 8195916 User Manual

THERMOSTAT CONTROLLER OPERATING INSTRUCTIONS
5
ITEM
1 Temperature Control Knob – Use to set thermostat control to desired temperature.
ON/OFF Switch- enables/disables power to fryer components. Switch illuminates when
2
activated.
3 Heating Mode Light – Indicates the fryer is heating.
Melt Cycle Light – Indicates the unit is operating in the melt-cycle mode. The fryer will
4
remain in the melt-cycle until this switch is turned off.
Optional Basket Lift Timers – Lowers respective basket lift when pressed. When timer
5
times-out, the basket lift is raised.
INTRODUCTION
The Thermostat Controller utilizes a thermostat that is directly connected to a temperature knob
mounted on the control panel. Rotating the knob to the desired cooking temperature physically
adjusts the thermostat control to that temperature. Placing the ON/OFF
position supplies power to the fryer's components and causes the switch to illuminate. Placing the
Melt Cycle Switch in the ON position causes the fryer to cycle on for a few seconds and off for a
longer period. The purpose is to prevent scorching shortening, and to prevent overheating the frypot
or elements while gradually melting blocks of shortening. This switch is also illuminated when in
the ON position. The Heat Mode Indicator
Do not cancel the melt-cycle mode if using solid shortening!
The fryer will remain in the Melt Cycle mode until turned off by placing the Melt Cycle
CHAPTER 5
1
DESCRIPTION
illuminates when the frypot is below setpoint.
DANGER
CAUTION
Switch in the "OFF" position.
5-1
ON
OFF
4 2
Switch in the ON
3