Setting The Scan Area - Xerox DocuMate 250 Installation Manual

Setting the Scan Area

Move pointer
Manually set area
Resize pointer
Output Dimensions
DocuMate 250 Scanner Installation Guide
Paper Size
If you know the size of the item(s) you're scanning, set the paper
size. This automatically sets the scan size to the paper size.
• Click the Paper Size button and select the image's paper size
from the list.
Units
The ruler around the edges of the image area and the output
dimensions can be displayed in inches, centimeters, or pixels.
• Click the Units button to select the units for the ruler. Clicking
the button toggles through the three choices. The ruler and
output dimensions change to the new units.
You can manually adjust the output area to scan specific sections
of an image. For example, if you're scanning a photograph and
want to focus on one section, manually setting the output size
removes the rest of the photograph from the final scanned image.
Scanning from PaperPort
29