[Adjust Paper Type]
Maintenance Mode
Adjust PaperType
Setting Item
Plain Paper
[Init/Del Data]
The [Init/Del Data] menu allows you to initialize the settings stored in the NV memory,
network ports, and hard disk, and delete data such as forms registered on the printer.
Note
• Executing initialization returns the settings to their default values.
Admin Menu
Init/Del Data
Setting Item
Initialize NVM
Init/Network Port
Hard Disk
Delete Form
Adjust PaperType
Sets the type of plain paper.
• [Light]
• [Heavy] (default)
Init/Del Data
Initialize NVM
Init/Del Data
Init/NetworkPort
Init/Del Data
Init/Del Data
Delete Form
Initializes the NV memory. All settings return to the defaults.
Note
• The NV memory is nonvolatile memory that retains the settings of the printer
even when its power is switched off.
• After changing this setting, reboot the printer.
Initializes the network/port settings (P. 102).
Note
• After changing this setting, reboot the printer.
Initializes the hard disk.
Note
• After changing this setting, reboot the printer.
• [Hard Disk] appears only when the hard disk (optional) is installed.
Deletes the ESC/P forms registered on the printer.
• [Delete ESCP Form]
Note
• [Not registered] is displayed if no form is registered.
Plain Paper
Description
Hard Disk
Description
5.2 Setting the Common Menus
131