Xerox DocuPrint 3055 User Manual page 152

Message
UnknownPaperType
Press SET
and Cancel JOB
Wrong paper size
Reload Bypass
Wrong paper size
Reload Tray N
Or check Dial
(N: tray 1 - 4)
Wrong password
Press SET
and Cancel JOB
152
6 Troubleshooting
The printer was requested by the job to automatically select a paper tray when the
[Paper Priority] setting for all paper types are set to [Off].
Cancel the print job by pressing the <Eject/Set> button on the control panel.
Set the priority order of the paper trays or manually select a paper tray on the control
panel.
Refer to
• "[System Settings]" (P. 116)
The paper size loaded in the bypass tray does not match the paper size set on the
print driver or on the control panel.
Load paper of the size set on the print driver or on the control panel.
Refer to
• "Loading Paper in the Bypass Tray" (P. 83)
The paper size loaded in the tray N does not match the paper size set with the paper
size dial.
Pull out the tray N, check the paper size and the paper size dial, and insert the tray.
To start printing, press the <Eject/Set> button on the control panel.
Refer to
• "Loading Paper in the Trays 1 - 4" (P. 85)
The password of the PDF file and that set on the printer do not match.
Cancel the job by pressing the <Eject/Set> button on the control panel.
Set the correct password on the control panel and try printing again.
Refer to
• "[PDF]" (P. 98)
Symptom/Cause/Remedy